Publications

Journal Articles

1. H. Safamehr, I. Izadi, J. Ghaisari, "Robust VI Droop Control of Grid-forming Inverters in the Presence of Feeder Impedance Variations & Nonlinear Loads", to be published in IEEE Transactions on Industrial Electronics, 2023.

2. R Raei, I Izadi, M Kamali, "Performance analysis of up/down counters in alarm design", Process Safety and Environmental Protection, vol. 170, pp. 877-885, 2023.

3. P. Borzou, J. Ghaisari, I. Izadi, Y. Eshraghi, Y. Gheisari, "A novel strategy for dynamic modeling of genome-scale interaction networks", Bioinformatics, vol. 39, 2023.

4. M. Asaadi, I. Izadi, A. Hassanzadeh, F. Yang, "Assessment of alarm systems for mixture processes and intermittent faults", Journal of Process Control, vol. 114, pp. 120-13, 2022.

5. F.S. Nazeri, M. Kadivar, I. Izadi, "A sensing system for continuous monitoring of bread dough during fermentation", Sensing and Imaging, vol. 22, pp. 1-22, 2021.

6. S. Khankalantary, I. Izadi, F. Sheikholeslam "Robust ADP-based solution of a class of nonlinear multi-agent systems with input saturation and collision avoidance constraints", ISA Transactions, vol. 107, pp. 52-62, 2020.

7. M.H. Roohi, T. Chen, I. Izadi, "Control and Alarm Interplay and Robust State-Feedback Synthesis with an Alarm Performance Constraint", Industrial & Engineering Chemistry Research, vol. 59, pp. 16708-16719, 2020.

8. S.F. Alem, E. Sabooni, F. Sheikholeslam, I. Izadi, "Adaptive robust controller for position control of piezoelectric actuator with unstructured uncertainty", Modares Mechanical Engineering, vol. 20, pp. 1625-1634, 2020. (in Persian)

9. M.R. Heidari, I. Izadi, "Comment on Performance assessment for generalized delay-timers in alarm configuration”, Journal of Process Control, vol. 84, pp. 168-170, 2019.

10. S. Khan Kalantari, I. Izadi, F. Sheikholeslam, "Designing of Three-dimensional Robust Guidance Law Using Adaptive Dynamic Programming with Input Saturation Constraint", Amirkabir Journal of Mechanical Engineering, vol. 52, pp. 3411-3424, 2019. (in Persiann)

11. T. Niazmand, I. Izadi, “Pattern mining in alarm flood sequences using a modified PrefixSpan algorithm”, ISA Transactions, vol. 90, pp. 287-293, 2019.

12. S.F. Alem, I. Izadi, F. Sheikholeslam, M. Ekramian, "Piezoelectric Actuators with Uncertainty: Observer-Based Hysteresis Compensation and Joint Stability Analysis", IEEE Transactions on Control Systems Technology, vol. 28, pp. 1997-2004, 2019.

13. Z. Mannani, I. Izadi, N. Ghadiri, "Preprocessing of alarm data for data mining", Industrial & Engineering Chemistry Research, vol. 58, pp. 11261-11274, 2019.

14. B. Shirani, M. Najafi, I. Izadi, "Cooperative load transportation using multiple UAVs", Aerospace Science and Technology, vol. 84, pp. 158-169, 2019.

15. J. Tousi, M. Kamali, I. Izadi, F. Sheikholeslam, "Distributed adaptive dynamic surface control for synchronization of uncertain nonlinear multi-agent systems", International Journal of Control, Automation and Systems, vol. 16, pp. 2733-2742, 2018.

16. H.M.H. Abdoli, M. Najafi, I. Izadi, F. Sheikholeslam, "Sliding mode approach for formation control of multi-agent systems with unknown nonlinear interactions", ISA Transactions, vol. 80, pp. 65-72, 2018.

17. F.S. Nazeri, M Kadivar, I. Izadi, M. Fathi, "Study of temporal and spatial porosity distribution of fermenting bread dough by CT-scan and image processing", Innovative Food Technologies, vol. 5, pp. 385-396, 2018. (in Persian)

18. M.S. Afzal, T. Chen, A. Badehkhoda, I. Izadi, "Analysis and design of time-deadbands for univariate alarm systems", Control Engineering Practice, vol. 71, pp. 96-107, 2018.

19. K. Rouhollahi, M. Emadi Andani, I. Izadi, S. M. Karbassi, “Controllability and Observability Analysis of Basal Ganglia Model and Feedback Linearization Control”, IET Systems Biology, vol. 11, pp. 144-154, 2017.

20. M.H. Roohi, I. Izadi, J. Ghaisari, “Bandwidth Allocation, Delay Bound Analysis and Controller Synthesis for Event-triggered Control Systems”, IET Control Theory & Applications, vol. 11, pp. 2870-2878, 2017.

21. K. Rouhollahi, M. Emadi Andani, S. M. Karbassi, I. Izadi, “Design of robust adaptive controller and feedback error learning for rehabilitation in Parkinson’s disease: a simulation study”, IET Systems Biology, vol. 11, pp. 19-29, 2017.

22. K. Rouhollahi, M. Emadi Andani, S. M. Karbassi, I. Izadi, “Designing a robust backstepping controller for rehabilitation in Parkinson's disease: a simulation study”, IET Systems Biology, vol. 10, pp. 136-146, 2016.

23. S.R. Kondaveeti, I. Izadi, S.L. Shah, D.S. Shook, R. Kadali, and T. Chen, “Quantification of alarm chatter based on run length distributions”, Chemical Engineering Research and Design, vol. 12, pp. 2550-2558, 2013.

24. N.A. Adnan, Y. Cheng, I. Izadi, and T. Chen, “Study of generalized delay-timers in alarm configuration”, Journal of Process Control, vol. 23, pp. 382-395, 2013.

25. Y. Cheng, I. Izadi, and T. Chen, “Optimal alarm signal processing: Filter design and performance analysis”, IEEE Transactions on Automation Science and Engineering, vol. 10, pp. 446-451, 2013.

26. K. Ahmed, I. Izadi, T. Chen, D. Joe, T. Burton, “Similarity analysis of industrial alarm flood data”, IEEE Transactions on Automation Science and Engineering, vol. 10, pp. 452-457, 2013.

27. Y. Cheng, I. Izadi, and T. Chen, “Pattern matching of alarm flood sequences by a modified Smith-Waterman algorithm”, Chemical Engineering Research and Design, vol. 91, pp. 1085-1094, 2013.

28. S.R. Kondaveeti, I. Izadi, S.L. Shah, T. Black, and T. Chen, “Graphical tools for routine assessment of industrial alarm systems”, Computers & Chemical Engineering, vol. 46, pp. 39-47, 2012.

29. J. Xu, J. Wang, I. Izadi, and T. Chen, “Performance assessment and design for univariate alarm systems based on FAR, MAR and AAD”, IEEE Transactions on Automation Science and Engineering, vol. 9, pp. 296–307, 2012.

30. E. Naghoosi, I. Izadi, and T. Chen, “Estimation of alarm chattering”, Journal of Process Control, vol. 21, pp. 1243–1249, 2011.

31. N.A. Adnan, I. Izadi, and T. Chen, “On expected detection delays for alarm systems with deadbands and delay-timers”, Journal of Process Control, vol. 21, pp. 1318–1331, 2011.

32. I. Izadi, Q. Zhao and T. Chen, “Analysis of performance criteria in sampled-data fault detection”, Systems & Control Letters, vol. 56, pp. 320–325, 2007.

33. I. Izadi, Q. Zhao and T. Chen, “An H∞ approach to fast rate fault detection for multirate sampled-data systems”, Journal of Process Control, vol. 16, pp. 651–658, 2006.

34. I. Izadi, T. Chen and Q. Zhao, “Norm invariant discretization for sampled-data fault de­tection”, Automatica, vol. 41, pp. 1633–1637, 2005.

35. I. Izadi, Q. Zhao and T. Chen, “An optimal scheme for fast rate fault detection based on multirate sampled data”, Journal of Process Control, vol. 15, pp. 307–319, 2005.

Refereed Conference Papers

32. N.A. Adnan, and I. Izadi, “On detection delays of filtering in industrial alarm systems”, Proceedings of the 21st Mediterranean Conference on Control and Automation, pp. 113–118, Crete, Greece, 2013. 

33. N.A. Adnan, Y. Cheng, I. Izadi, and T. Chen, “A generalized delay-timer for alarm trig­gering”, Proceedings of the American Control Conference, pp. 6679–6684, Montreal, Canada, 2012.

34. E. Naghoosi, I. Izadi, and T. Chen, “A study on the relation between alarm deadbands and optimal alarm limits”, Proceedings of the American Control Conference, pp. 3627–3632, San Francisco, CA, 2011.

35. N.A. Adnan, I. Izadi, and T. Chen, “Computing detection delays in industrial alarm sys­tems”, Proceedings of the American Control Conference, pp. 786–791, San Francisco, CA, 2011.

36. S.R. Kondaveeti, I. Izadi, S.L. Shah, and T. Chen, “On the use of delay timers and latches for efficient alarm design”, Proceedings of the 19th Mediterranean Conference on Control and Automation, pp. 970–975, Corfu, Greece, 2011.

37. Y. Cheng, I. Izadi, and T. Chen, “On optimal alarm filter design”, Proceedings of the International Symposium on Advanced Control of Industrial Processes (keynote paper), pp. 139–145, Hangzhou, China, 2011.

38. S.R. Kondaveeti, I. Izadi, S.L. Shah, D.S. Shook, and R. Kadali, “Quantification of alarm chatter based on run length distributions”, Proceedings of the 49th IEEE Conference on Decision and Control, pp. 6809–6814, Atlanta, GA, 2010.

39. I. Izadi, S.L. Shah, and T. Chen, “Effective resource utilization for alarm management”, Proceedings of the 49th IEEE Conference on Decision and Control, pp. 6803–6808, Atlanta, GA, 2010.

40. S.R. Kondaveeti, I. Izadi, S.L. Shah, and T. Black, “Graphical representation of industrial alarm data”, Proceedings of the 11th IFAC Symposium on Analysis, Design and Evaluation of Human-Machine Systems, Valenciennes, France, 2010.

41. S.R. Kondaveeti, S.L. Shah, and I. Izadi, “Application of multivariate statistics for efficient alarm generation”, Proceedings of the 7th IFAC SAFEPROCESS, pp. 657–662, Barcelona, Spain, 2009.

42. I. Izadi, S.L. Shah, D.S. Shook, S.R. Kondaveeti, and T. Chen, “A framework for opti­mal design of alarm systems”, Proceedings of the 7th IFAC SAFEPROCESS, pp. 651–656, Barcelona, Spain, 2009.

43. I. Izadi, S.L. Shah, D.S. Shook, and T. Chen, “An introduction to alarm analysis and design”, Proceedings of the 7th IFAC SAFEPROCESS, pp. 645–650, Barcelona, Spain, 2009.

44. I. Izadi, S.L. Shah and T. Chen, “A direct approach to fault detection in non-uniformly sampled systems”, Proceedings of the 17th IFAC World Congress, pp. 10148–10153, Seoul, Korea, 2008.

45. I. Izadi, S.L. Shah and T. Chen, “Parity space fault detection based on irregularly sampled data”, Proceedings of the American Control Conference, pp. 2798–2803, Seattle, WA, 2008.

46. I. Izadi, T. Chen and Q. Zhao, “H∞ performance comparison of single-rate and multi-rate sampled-data systems”, Proceedings of the American Control Conference, pp. 183–187, Minneapolis, MN, 2006.

47. I. Izadi, Q. Zhao and T. Chen, “An optimal fast rate fault detection scheme for multirate sampled-data systems”, Proceedings of the 43rd IEEE Conference on Decision and Control, pp. 4776–4781, Paradise Island, The Bahamas, 2004.